Hacks 101: How to use Pumpin' Pal Silicone Flanges with Collar Rings
Pumpin' Pal Flanges and Collar Rings
It's no secret Pumpin' Pal flanges are unlike any other flanges because of the angled shape to mimic the natural breast. Our silicone XS & S, and now our newest size option, 2XS (fitting a range of sizes from 10-14mm) are all made with a medical-grade silicone designed to fit comfortably, and also help hold your breast tissue in place - allowing only your nipple to be pulled in the tunnel of the flange. Our silicone flanges are so special that they all come with their own collar rings! Each pair of silicone flanges (2XS, XS, & S) must use the collar rings when pumping — an important component to your pump set up when using Pumpin' Pal flanges.So what exactly are Collar Rings?
Collar Rings are used with all of our silicone flanges to allow them to fit the many pumps on the market.
How to Apply the Collar Rings
Instead of pushing the collar rings straight on the flange, which mostly results in it looking like this ⬇️
Try rotating and twisting the collar rings on the flange so it fits flush with the end of the flange, like this ⬇️
* Tip: Some flanges are a little tougher than others to apply the collar rings to (like the 2XS), in this case, if twisting is still not working, try to put a little water on the outside of the flange and inside of the collar rings and it should slip on perfectly.
When to Apply the Collar Rings
We've tested it so you don't have to—the best time to apply the collar rings is right after washing. This will help it twist on with ease, with a freshly cleaned surface and a little leftover water.
